24/7 Emergency Locksmith in Grand Forks AFB, ND

A panic exit bar (or crash bar) is a spring-loaded door latch mechanism required by OSHA and local fire codes on commercial emergency exit doors. It allows occupants to push and exit freely in an emergency while preventing unauthorized exterior entry. We repair dogging mechanisms, vertical rod latches, and install new exit devices.

Yes. When a key shears off inside a lock cylinder, attempting to pry it out with paperclips or tweezers often pushes the fragment deeper or damages internal wafers. Our mobile vans carry precision spiral and hooked key extractors that safely remove broken brass pieces in minutes, allowing us to cut a replacement key on the spot.

We believe in honest, upfront pricing with zero hidden surcharges. Our technician arrives on-site, evaluates your specific lock hardware (residential deadbolt, high-security cylinder, automotive transponder, or commercial mortise), and gives you a clear project estimate before picking up any tools. You must approve the price before any physical work begins.

Do not force the key with pliers, as this almost always shears the key off inside the cylinder. A stuck key is usually caused by worn internal pins, loose cylinder set screws, or dry tumblers. Spray a small amount of dry Teflon or graphite lubricant and call our technician to safely extract the key and service the cylinder.

Our average emergency mobile dispatch window is between 15 and 30 minutes, depending on your exact location and local traffic conditions. When you call 844-442-1744, our field coordinators pinpoint the nearest mobile technician in your area and dispatch them immediately to your address.

If the lock cylinder is loose, sticking, or you simply want to invalidate old keys, rekeying or minor latch adjustment is usually all that is needed. Complete replacement is recommended if the brass housing is cracked, the deadbolt was kicked in during an attempted break-in, or you wish to upgrade to higher ANSI security standards.

High-security locks (such as Medeco, Mul-T-Lock, and Schlage Primus) feature patented key control, hardened steel drill-resistant pins, sidebars, and dual-locking mechanisms. They are virtually impossible to bump or pick with standard tools and require authorized signature cards to duplicate keys.

Yes! As long as your door locks use the same keyway brand (such as all Kwikset keyways or all Schlage keyways), our technician can re-pin all your exterior deadbolts, knob locks, and garage entry doors to operate seamlessly with a single convenient master key.