24/7 Emergency Locksmith in Kenansville, NC

A panic exit bar (or crash bar) is a spring-loaded door latch mechanism required by OSHA and local fire codes on commercial emergency exit doors. It allows occupants to push and exit freely in an emergency while preventing unauthorized exterior entry. We repair dogging mechanisms, vertical rod latches, and install new exit devices.

Yes. When a key shears off inside a lock cylinder, attempting to pry it out with paperclips or tweezers often pushes the fragment deeper or damages internal wafers. Our mobile vans carry precision spiral and hooked key extractors that safely remove broken brass pieces in minutes, allowing us to cut a replacement key on the spot.

Yes! As long as your door locks use the same keyway brand (such as all Kwikset keyways or all Schlage keyways), our technician can re-pin all your exterior deadbolts, knob locks, and garage entry doors to operate seamlessly with a single convenient master key.

Do not force the key with pliers, as this almost always shears the key off inside the cylinder. A stuck key is usually caused by worn internal pins, loose cylinder set screws, or dry tumblers. Spray a small amount of dry Teflon or graphite lubricant and call our technician to safely extract the key and service the cylinder.

Lock rekeying alters the internal pin tumbler combination of your existing lock cylinder so that old keys no longer function, while a new key operates the lock smoothly. Rekeying allows you to retain your existing handlesets and deadbolts, making it significantly more affordable than purchasing and installing brand-new hardware.

No. Our professional locksmiths practice non-destructive entry methods. Using specialized lock picks, decoding instruments, air wedges, and bypass tools, we open over 98% of standard residential, commercial, and automotive locks with zero damage to the lock mechanism, weather stripping, door frame, or vehicle paint.

We believe in honest, upfront pricing with zero hidden surcharges. Our technician arrives on-site, evaluates your specific lock hardware (residential deadbolt, high-security cylinder, automotive transponder, or commercial mortise), and gives you a clear project estimate before picking up any tools. You must approve the price before any physical work begins.

If the lock cylinder is loose, sticking, or you simply want to invalidate old keys, rekeying or minor latch adjustment is usually all that is needed. Complete replacement is recommended if the brass housing is cracked, the deadbolt was kicked in during an attempted break-in, or you wish to upgrade to higher ANSI security standards.